Page Comparison

1. Resources Page

1.1 Verify that you can reach the Add Citations page

1.1.1

From the Resources page, "Add" a new item and select "Add Citation List" from the menu. The page should refresh to show the Add Citations page.

? 1.2 Verify that you can save a populated an empty Citation List ?

1.2.1

From the Resources page, "choose to Add " a new item and select "Add Citation List" from the menu. The page should refresh to show the Add Citations page should appear. Click the "Search Library Resources" button. Conduct a simple search and add up to 10 citations (one page). Set the title to "One Page List", add any description and save the Citation List. When you finish you should see your Citation List on the Resources page"Revise Citation List". You should be taken to the "Revise Citation List" page where you will see no citations in the list. Click "Finish", title the list, "Empty List" and click "Finish". The Citation List should now appear in your Resources.

1.3 Verify that you can save a populated Citation List

1.3.1

From the Resources page, "Add" a new item and select "New Add Citation List" from the menu. The page should refresh to show the Add Citations page. Click the "Search Library Resources" button. Conduct a simple search and add more than up to 10 citations (more than one page). Set the title to "Multi One Page List", add any description and save the Citation List. Feel free to add multiple of these types of Citation Lists with an increasing number of citations (i.e. "2 Page List", "3 Page List", "6 Page List", etc.). When you finish, your Citation List(s) should appear on the Resources page. When you finish you should see your Citation List on the Resources page.

? Verify that you can Copy an existing Citation List

?

1.3.2

From the Resources page, under "ActionsAdd" a new item and select "Copy" for an existing Add Citation List. ??????? steps ???????

?

From the Resources page, check the checkbox next to a Citation List. Click on the "Copy" button. ??????? steps ???????

?

1) Did all of the citations get copied? Did all of the fields in all of the citations get copied? 2)What happens if you add some citations to the original? They should not show up in the copy. 3) What happens if you add some citations to the copy? They should not show up in the original. 4) What happens if you delete citations from the copy or the original? Changes to one should not be reflected in the other. 5) What happens if you edit citations in original or the copy?
You'll want to remove info from some fields, add info to some fields, change info in some fields. Again, changes to the citations in one list should not be reflected in the citations of the other.

" from the menu. The page should refresh to show the Add Citations page. Click the "Search Library Resources" button. Conduct a simple search and add more than 10 citations (more than one page). Set the title to "Multi Page List", add any description and save the Citation List. Feel free to add multiple of these types of Citation Lists with an increasing number of citations (i.e. "2 Page List", "3 Page List", "6 Page List", etc.). When you finish, your Citation List(s) should appear on the Resources page.

? 1.4 Verify that you can Move access the read-only view of an existing Citation List ?

1.4.1

From the Resources page, under "Actions" select "Move" for an existing Citation List. ??????? steps ??????? click on the title of a Citation List. A read-only view of the selected Citation List should appear in a new window.

?

From the Resources page, check the checkbox next to a Citation List. Click on the "Move" button. ??????? steps ???????

? Verify that  

1.5 Verify that you can Revise an existing Citation List's details

? 1.5.1

From the Resources page, under "Actions" for an existing Citation List, select "Revise Details" for an existing Citation List. The page should refresh to show the "Revise Details" page. Change the Citation List's details in any way that you'd like and then click the "Update" button. When you are done revising, view it in read-only mode the Citation List by clicking its title to verify that your revisions have been saved.

? 1.6 Verify that you can Revise an existing Citation List ?

1.6.1

From the Resources page, under "Actions" for an existing Citation List, select "Revise Citation List" for an existing Citation List. The page should refresh to show the "Revise Citation List" page. Add, revise or remove citations in any way that you'd like and then click the "Done Revising List" button. When you are done revising, view it in read-only mode the Citation List by clicking its title to verify that your revisions have been saved.

? 1.7 Verify that you can Remove Copy an existing Citation List ?

1.7.1

From the Resources page, under "Actions" select "Remove" for an existing Citation List. Instead of clicking the "Remove" button, hit the "Cancel" button. The page should refresh to show the Resources page with the Citation List still there, select "Copy". A paste icon (Image Added) should appear next to the "Add" menu for all existing folders in your Resources. Click on the paste icon for any folder to copy the Citation List to that folder. A copy of the Citation List should now appear in that folder.

?

1.7.2

From the Resources page, under "Actions" select "Remove" for an existing Citation List. After confirming the remove, it should not appear on Resources page anymorecheck the checkbox next to a Citation List. The "Copy" button atop the table containing your Resources should become enabled. Click on the enabled "Copy" button. A paste icon (Image Added) should appear next to the "Add" menu for all existing folders in your Resources. Click on the paste icon for any folder to copy the Citation List to that folder. A copy of the Citation List should now appear in that folder.

  ?

1.7.3

From the Resources page, check the checkbox next to a Citation List. Click on the "Remove" button. ??????? steps ???????

? Verify that you can Duplicate an existing Citation List

?

From the Resources page, under "Actions" select "Duplicate" for an existing Citation List. ??????? steps; what is difference between copy and duplicate ??????? two or more Citation Lists. After checking just one Citation List, the "Copy" button atop the table containing your Resources should become enabled. After checking two or more Citation Lists, click on the enabled "Copy" button. A paste icon (Image Added) should appear next to the "Add" menu for all existing folders in your Resources. Click on the paste icon for any folder to copy all checked Citation Lists to that folder. Copies of the checked Citation Lists should now appear in that folder.

?  

1) Did all of the citations get copied? Did all of the fields in all of the citations get copied? 2)What happens if you add some citations to the original? They should not show up in the copy. 3) What happens if you add some citations to the copy? They should not show up in the original. 4) What happens if you delete citations from the copy or the original? Changes to one should not be reflected in the other. 5) What happens if you edit citations in original or the copy?
You'll want to remove info from some fields, add info to some fields, change info in some fields. Again, changes to the citations in one list should not be reflected in the citations of the other.8 Verify that copied Citation Lists are true copies

1.8.1

Open another window/tab and compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that all the citations were copied.

1.8.2

Click on the "Asbtract View" link and verify that all of the fields for each citation were copied.

1.9 Verify that copied Citation Lists are no longer linked to original Citation Lists

1.9.1

Add new citations to the original Citation List. Compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that the new citations do not show up in the copy list.

? Verify that you can access 1.9.2

Add new citations to the copy Citation List. Compare the read-only view of an existing the original Citation List

?

From the Resources page, click on the title of a Citation List. You should see a readto the read-only view of your the copied Citation List . ?????? how close out of this window; also showing double scroll bar ?????????? and verify that the new citations do not show up in the original list.

? Verify that you can export...

?

From the Resources page, click on the title ??????? steps ??????? I don't see this option available anymore!!!!! 1.9.3

Delete some citations from the original Citation List. Compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that the deleted citations still show up in the copy list.

2. Add Citations Page

2.1 Verify that the Add Citations page is properly initialized

2.1.1

??????? is this necessary to check citation list and citation count fields ??????? 1.9.4

Delete some citations from the copy Citation List. Compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that the deleted citations still show up in the original list.

2.2 Verify that you can reach the "Search Library Resources - Basic Search" page

2.2.1

Click on the "Search Library Resources" button. The page should refresh to show the "Search Library Resources - Basic Search" page1.9.5

Make some edits to citations in the original Citation List (remove info from some fields, add info to some fields, change info in some fields). Compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that the changes are not reflected in the copy list.

2.3 Verify that you can reach the "Search Google Scholar" page

2.3.1

Click on the "Search Google Scholar" button. The "Google Scholar" pop-up window should open. 1.9.6

Make some edits to citations in the copy Citation List (remove info from some fields, add info to some fields, change info in some fields). Compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that the changes are not reflected in the original list.

21.410 Verify that you can reach the "Add Citation" page 2.4Move an existing Citation List

1.10.1

Click on the the "Create New Citation" button. The page should refresh to show the "Add Citation" page From the Resources page, under "Actions" for an existing Citation List, select "Move". A paste icon (Image Added) should appear next to the "Add" menu for all existing folders in your Resources. Click on the paste icon for any folder to move the Citation List to that folder. The Citation List should now appear in that folder.

2.5 Verify that you can reach the Revise Citation List page.

2.5.1

Click on the the "Revise Citation List" button. The page should refresh to show the "Revise Citation List" page, with no citations listed1.10.2

From the Resources page, check the checkbox next to a Citation List. The "Move" button atop the table containing your Resources should become enabled. Click on the enabled "Move" button. A paste icon (Image Added) should appear next to the "Add" menu for all existing folders in your Resources. Click on the paste icon for any folder to move the Citation List to that folder. The Citation List should now appear in that folder and not in their old location.

2.6 Verify you can Cancel a new Citation List

2.6.1

Click the "Cancel Citation List" button. The page should refresh to show the Resources page.

1.10.3

From the Resources page, check the checkbox next to two or more Citation Lists. After checking just one Citation List, the "Move" button atop the table containing your Resources should become enabled. After checking two or more Citation Lists, click on the enabled "Move" button. A paste icon (Image Added) should appear next to the "Add" menu for all existing folders in your Resources. Click on the paste icon for any folder to move all checked Citation Lists to that folder. The checked Citation Lists should now appear in that folder and not in their old location.

3. Search Library Resources - Basic Search Page

3.1 Verify that the "Search Library Resources - Basic Search" page is initialized properly

3.1.1

??????? is this necessary to check citation list and citation count fields ???????  

1.11 Verify that moved Citation Lists are completely moved

1.11.1

Compare the read-only view of the original Citation List to the read-only view of the copied Citation List and verify that all of the citations were moved.

? Verify that you can Show Descriptions for all databases

? 1.11.2

Click on the "Show DescriptionsAsbtract View" action link. Descriptions should appear under each database titlelink and verify that all of the fields for each citation were moved.

? Verify that you can Hide Descriptions for all databases

?

Click on the "Hide Descriptions" action link. Descriptions should disappear, and just the database titles should be showing1.12 Verify that moved Citation Lists are still editable

1.12.1

Make some edits to citations in the moved Citation List (remove info from some fields, add info to some fields, change info in some fields). Open the read-only view of the moved Citation List and verify that the changes show up in the moved list.

? Verify that you can toggle descriptions for individual databases

?

Click on the toggle button for an individual database. The toggle button should point downwards and the database description should show. Click on the toggle button again. The button should point to the right and the database description should disappear1.12.2

Add new citations to the moved Citation List. Open the read-only view of the moved Citation List and verify that the new citations show up in the moved list.

?

Click on the toggle button again. The button should point to the right and the database description should disappear1.12.3

Delete some citations from the moved Citation List. Open the read-only view of the moved Citation List and verify that the deleted citations no longer show up in the moved list.

? 1.13 Verify that you can Remove an existing Citation List

1.13.1

From the Resources page, under "Actions" for an existing Citation List, select a search category and sub-category ? "Remove". The page should refresh to show a confirmation page for the removal of the Citation List. Press "Cancel". The page should refresh to show the Resources page with the Citation List still there.

? Verify that you can select individual databases

? 1.13.2

From the Resources page, under "Actions" for an existing Citation List, select "Remove". The page should refresh to show a confirmation page for the removal of the Citation List. Press "Remove". The page should refresh to show the Resources page without the Citation List you've just removed.

?

? Verify that you can select no more than eight (8) databases

?

? Verify "databases selected" count 1.13.3

From the Resources page, check the checkbox next to a Citation List. The "Remove" button atop the table containing your Resources should become enabled. Click on the enabled "Remove" button. The page should refresh to show a confirmation page for the removal of the checked Citation List. Press "Remove". The page should refresh to show the Resources page without the Citation List you've just removed.

? Verify that the "Searching..." alert appears when searching

?

Select a Search Set and enter search terms that will result in a large number of records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds. During this time, the word "Searching ..." should be appear with a rotating circle. 1.13.4

From the Resources page, check the checkbox next to two or more Citation Lists. After checking just one Citation List, the "Remove" button atop the table containing your Resources should become enabled. After checking two or more Citation Lists, click on the enabled "Remove" button. The page should refresh to show a confirmation page for the removal of the checked Citation Lists. Press "Remove". The page should refresh to show the Resources page without the Citation Lists you've just removed.

?

1.14 Verify that you can Duplicate an existing Citation List

1.14.1

From the Resources page, under "Actions" for an existing Citation List, select "Duplicate". A Citation List titled "Copy of (name of the duplicated Citation List)" should appear in the same folder as the duplicated Citation List.

? Verify that your search criteria are persistent

?

Select a Search Set and enter search terms that will result in a large number of records found (i.e. General Interest, food). When the results are returned, your your search terms should remain in the Search Library Resources - Basic Search form1.15 Verify that duplicated Citation Lists are true copies

1.15.1

Open another window/tab and compare the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that all the citations were copied.

?

Select a Search Set and enter search terms that will result in a large number of records found (i.e. General Interest, food). When the results are returned, click the Next Page button. When the new page is loaded, your search criteria your search terms should remain in the Search Library Resources - Basic Search form. 1.15.2

Click on the "Asbtract View" link and verify that all of the fields for each citation were copied.

?

Select a Search Set and enter search terms that will result in a large number of records found (i.e. General Interest, food). When the results are returned, try a different page size. When the new page is loaded, your search criteria your search terms should remain in the Search Library Resources - Basic Search form 

1.16 Verify that duplicated Citation Lists are no longer linked to original Citation Lists

1.16.1

Add new citations to the original Citation List. Compare are the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that the new citations do not show up in the duplicated list.

? Verify that you can view search results

?

Select a Search Set and enter search terms that will result in over 100,000 records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds. 1.16.2

Add new citations to the duplicated Citation List. Compare the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that the new citations do not show up in the original list.

?

Select a Search Set and enter search terms that will result in around 1000 records found. You should see results within approximately 10-20 seconds1.16.3

Delete some citations from the original Citation List. Compare the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that the deleted citations still show up in the duplicated list.

?

Select a Search Set and enter search terms that will result in around 100 records found. You should see results within approximately 10 seconds.

?

Select a Search Set and enter search terms that will result in 20 or less records found. You should see results within approximately 10 seconds. 1.16.4

Delete some citations from the duplicated Citation List. Compare the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that the deleted citations still show up in the original list.

?

Select a Search Set and enter search terms that will result in one or two records found. You should see results within less than 10 seconds.

?

Select a Search Set and enter search terms that will result in zero records found. You should see (zero) results within less than 10 seconds. 1.16.5

Make some edits to citations in the original Citation List (remove info from some fields, add info to some fields, change info in some fields). Compare the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that the changes are not reflected in the duplicated list.

1.16.6

Make some edits to citations in the duplicated Citation List (remove info from some fields, add info to some fields, change info in some fields). Compare the read-only view of the original Citation List to the read-only view of the duplicated Citation List and verify that the changes are not reflected in the original list.

? Verify that you can page through search results

?

2. Add Citations Page

2.1 Verify that the Add Citations page is properly initialized

2.1.1

Verify that the correct Citation List title and Citation List count (number of citations in this list) appear. If you are adding a new Citation List, the title of the Citation List should be "New Citation List" (or "New Citation List-#" if you already have Citation Lists titled "New Citation List").

?

?

Select a Search Set and enter search terms that will result in around 1000 records found. You should see results within approximately 10-20 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

 2.2 Verify that you can reach the "Search Library Resources - Basic Search" page

2.2.1

Click on the "Search Library Resources" button. The page should refresh to show the "Search Library Resources - Basic Search" page.

?

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

2.3 Verify that you can reach the "Search Google Scholar" page

2.3.1

Click on the "Search Google Scholar" button. The "Google Scholar" pop-up window should open.

?

2.4 Verify that you can reach the "Add Citation" page

2.4.1

Click on the the "Create New Citation" button. The page should refresh to show the "Add Citation" page.

?

2.5 Verify that you can reach the Revise Citation List page.

2.5.1

Click on the the "Revise Citation List" button. The page should refresh to show the "Revise Citation List" page, with no citations listed.

?

Select a Search Set and enter search terms that will result in 20 or less records found. You should see results within approximately 10 seconds. When the results are returned, continue to click the Next Page button (depending on your default page size, this button may be disabled) until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

2.6 Verify you can Cancel a new Citation List

2.6.1

Click the "Cancel Citation List" button. The page should refresh to show the Resources page.

?

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page. Please try this with all the Search Sets available.

?

Select a Search Set and enter search terms that will result in one or two records found. You should see results within less than 10 seconds. The Next Page button should be disabled. 3. Search Library Resources - Basic Search Page

3.1 Verify that the "Search Library Resources - Basic Search" page is initialized properly

3.1.1

Verify that the correct Citation List title and Citation List count (number of citations in this list) appear. If you are adding a new Citation List, the title of the Citation List should be "New Citation List" (or "New Citation List-#" if you already have Citation Lists titled "New Citation List").

?

3.2 Verify that you can Show Descriptions for all databases

3.2.1

Click on the "Show Descriptions" action link. Descriptions should appear under each database title.

? 3.3 Verify that you can change your page size

?

Conduct a search that produces multiple pages of results. Try all different page sizes on the first page of results.

?

Conduct a search that produces multiple pages (more than 200 records) of results. Once the first page of results is returned, go to the Next Page, and then iterate through the process of changing the page size, moving to the next page, coming back to the previous page, changing the page size and then iterating againHide Descriptions for all databases

3.3.1

Click on the "Hide Descriptions" action link. Descriptions should disappear and just the database titles should be showing.

? Verify the "robustness" of the search terms keyword syntax

?

You should be able to search for phrases (i.e. search terms: <lyrics for "a day in the life">); common words {a,and,be,for,from,has,i,in,is,it,of,on,to,the,not,or} are ignored unless they are a part of a phrase; everything is ANDed; extraneous punctuation {?!;,':+-@#$%^%&*().} should be ignored; whitespace characters {tabs, extra spaces, forced newline characters} should be ignored. Please experiment with the keyword search's features to narrow or tailor your searches, or to try and break the search. It will be difficult to gauge the effectiveness of the search because the databases being searched have their own searching mechanisms and so does the metasearch engine. What we're looking for in this test is to see if there is any combination of search terms that breaks our keyword search and produces an error. These features may currently only be available at UM.

 3.4 Verify that you can toggle descriptions for individual databases

3.4.1

Click on the toggle button for an individual database. The toggle button should point downwards and the database description should show. Click on the toggle button again. The button should point to the right and the database description should disappear.

3.4.2

Click on the toggle button again. The button should point to the right and the database description should disappear.

3.5 Verify that you can select search categories and sub-categories

3.5.1

Use the drop-down menu to select a search category. The page should refresh to show either 1) a "select sub-category" drop-down menu, or 2) an updated list of category appropriate databases. If you receive a "select sub-category", select one and you should then see an updated list of category appropriate databases. Do this for several different categories and sub-categories.

3.6 Verify that you can select/unselect individual databases

3.6.1

Check the checkbox next to unselected database. Verify that that the 1) the database title/abstract is highlighted and 2) the "databases selected" count increases.

3.6.2

Uncheck the checkbox next to a selected database. Verify that the 1) the database title/abstract is no longer highlighted and 2) the "databases selected" count decreases.

3.6.3

Select more than 8 databases and you should receive a pop-up window stating that you can select no more than 8 databases at one time.

3.6.4

Select and unselect a number of database and verify that the "databases selected" count increases/decreases appropriately.

3.7 Verify that the "Searching..." alert appears when searching

3.7.1

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds. During this time, the word "Searching ..." should be appear with a rotating circle.

3.7.2

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, click the Next Page button. While the next page is loading, the word "Loading..." should appear with a rotating circle next to the Search Results Table header.

3.8 Verify that your search criteria are persistent

3.8.1

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, your your search terms should remain in the Search Library Resources - Basic Search form.

3.8.2

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, click the Next Page button. When the new page is loaded, your search criteria your search terms should remain in the Search Library Resources - Basic Search form.

3.8.3

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, try a different page size. When the new page is loaded, your search criteria your search terms should remain in the Search Library Resources - Basic Search form.

3.9 Verify that you can view search results

3.9.1

Enter search terms and as needed select search category, sub-category and databases that will result in over 100,000 records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds.

3.9.2

Enter search terms and as needed select search category, sub-category and databases that will result in around 1000 records found. You should see results within approximately 10-20 seconds.

3.9.3

Enter search terms and as needed select search category, sub-category and databases that will result in around 100 records found. You should see results within approximately 10 seconds.

3.9.4

Enter search terms and as needed select search category, sub-category and databases that will result in 20 or less records found. You should see results within approximately 10 seconds.

3.9.5

Enter search terms and as needed select search category, sub-category and databases that will result in one or two records found. You should see results within less than 10 seconds.

3.9.6

Enter search terms and as needed select search category, sub-category and databases that will result in zero records found. You should see (zero) results within less than 10 seconds.

3.10 Verify that you can page through search results

3.10.1

Enter search terms and as needed select search category, sub-category and databases that will result in over 100,000 records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

3.10.2

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

3.10.3

Enter search terms and as needed select search category, sub-category and databases that will result in around 1000 records found. You should see results within approximately 10-20 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but the next page button will be disabled once you reach the end of the search results set.

3.10.4

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

3.10.5

Enter search terms and as needed select search category, sub-category and databases that will result in around 100 records found. You should see results within approximately 10 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

3.10.6

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

3.10.7

Enter search terms and as needed select search category, sub-category and databases that will result in 20 or less records found. You should see results within approximately 10 seconds. When the results are returned, continue to click the Next Page button (depending on your default page size, this button may be disabled) until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

3.10.8

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

3.10.9

Enter search terms and as needed select search category, sub-category and databases that will result in one or two records found. You should see results within less than 10 seconds. The Next Page button should be disabled.

3.10.10

Enter search terms and as needed select search category, sub-category and databases that will result in zero records found. You should see (zero) results within less than 10 seconds. The Next Page button should be non-existent or, if it does exist, it should be disabled.

3.11 Verify that you can change your page size

3.11.1

Conduct a search that produces multiple pages of results. Try all different page sizes on the first page of results.

3.11.2

Conduct a search that produces multiple pages (more than 200 records) of results. Once the first page of results is returned, go to the Next Page, and then iterate through the process of changing the page size, moving to the next page, coming back to the previous page, changing the page size and then iterating again.

3.12 Verify that you can add a citation from the search results list

3.12.1

Add citations and verify that: 1) the "Add" button becomes a "Remove" button, 2) the added citation becomes highlighted, and 3) the citation count increases by one.

3.12.2

From a "Search Library Resources" page populated with search results, add a number (say, 5) of Citations in quick succession and click to "Review Citation List". Verify that clicking the "Add" button on a citation disables other buttons on the screen momentarily as the citation is added to the list. Verify that all the citations appear on the "Review Citation List" screen.

3.13 Verify that you can remove a citation from the search results list

3.13.1

Remove citations and verity that: 1) the "Remove" button becomes an "Add" button, 2) the removed citation is no longer highlighted, and 3) the citation count decreases by one.

3.14 Verify that you can properly view inline citations

3.14.1

The following format should be followed (it is in Journal Article form; similar fields apply to other Citation Types):

Title.
Author 1; Author 2; and Author 3. Journal Title, Vol(Iss) Date. Pages.

Note that if a citation does not have a certain field (such as Pages, for example) it will not appear in the inline display.

4. Search Library Resources - Advanced Search Page

4.1 Verify that the "Search Library Resources - Advanced Search" page is initialized properly

4.1.1

Verify that the correct Citation List title and Citation List count (number of citations in this list) appear. If you are adding a new Citation List, the title of the Citation List should be "New Citation List" (or "New Citation List-#" if you already have Citation Lists titled "New Citation List").

4.2 Verify that you can Show Descriptions for all databases

4.2.1

Click on the "Show Descriptions" action link. Descriptions should appear under each database title.

4.3 Verify that you can Hide Descriptions for all databases

4.3.1

Click on the "Hide Descriptions" action link. Descriptions should disappear, and just the database titles should be showing.

4.4 Verify that you can toggle descriptions for individual databases

4.4.1

Click on the toggle button for an individual database. The toggle button should point downwards and the database description should show. Click on the toggle button again. The button should point to the right and the database description should disappear.

4.4.2

Click on the toggle button again. The button should point to the right and the database description should disappear.

4.5 Verify that you can select search categories and sub-categories

4.5.1

Use the drop-down menu to select a search category. The page should refresh to show either 1) a "select sub-category" drop-down menu, or 2) an updated list of category appropriate databases. If you receive a "select sub-category", select one and you should then see an updated list of category appropriate databases. Do this for several different categories and sub-categories.

4.6 Verify that you can select/unselect individual databases

4.6.1

Check the checkbox next to unselected database. Verify that that the 1) the database title/abstract is highlighted and 2) the "databases selected" count increases.

4.6.2

Uncheck the checkbox next to a selected database. Verify that the 1) the database title/abstract is no longer highlighted and 2) the "databases selected" count decreases.

4.6.3

Select more than 8 databases and you should receive a pop-up window stating that you can select no more than 8 databases at one time.

4.6.4

Select and unselect a number of database and verify that the "databases selected" count increases/decreases appropriately.

4.7 Verify that the "Searching..." alert appears when searching

4.7.1

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds. During this time, the word "Searching ..." should be appear with a rotating circle.

4.7.2

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, click the Next Page button. While the next page is loading, the word "Loading..." should appear with a rotating circle next to the Search Results Table header.

4.8 Verify that the "Clear Form" button works

4.8.1

Enter search terms in the available fields (keyword, author, title, subject, year) and click on the "Clear Form" button. The fields should reset to being empty.

4.9 Verify that your search criteria are persistent

4.9.1

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, your your search terms should remain in the Search Library Resources - Advanced Search form.

4.9.2

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, click the Next Page button. When the new page is loaded, your search criteria your search terms should remain in the Search Library Resources - Basic Advanced form.

4.9.3

Enter search terms and as needed select search category, sub-category and databases that will result in a large number of records found (i.e. General Interest, food). When the results are returned, try a different page size. When the new page is loaded, your search criteria your search terms should remain in the Search Library Resources - Basic Advanced form.

4.10 Verify that you can view search results

4.10.1

Enter search terms and as needed select search category, sub-category and databases that will result in over 100,000 records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds.

4.10.2

Enter search terms and as needed select search category, sub-category and databases that will result in around 1000 records found. You should see results within approximately 10-20 seconds.

4.10.3

Enter search terms and as needed select search category, sub-category and databases that will result in around 100 records found. You should see results within approximately 10 seconds.

4.10.4

Enter search terms and as needed select search category, sub-category and databases that will result in 20 or less records found. You should see results within approximately 10 seconds.

4.10.5

Enter search terms and as needed select search category, sub-category and databases that will result in one or two records found. You should see results within less than 10 seconds.

4.10.6

Enter search terms and as needed select search category, sub-category and databases that will result in zero records found. You should see (zero) results within less than 10 seconds.

4.11 Verify that you can page through search results

4.11.1

Enter search terms and as needed select search category, sub-category and databases that will result in over 100,000 records found (i.e. General Interest, food). You should see results within approximately 10-20 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

4.11.2

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

4.11.3

Enter search terms and as needed select search category, sub-category and databases that will result in around 1000 records found. You should see results within approximately 10-20 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but the next page button will be disabled once you reach the end of the search results set.

4.11.4

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

4.11.5

Enter search terms and as needed select search category, sub-category and databases that will result in around 100 records found. You should see results within approximately 10 seconds. When the results are returned, continue to click the Next Page button until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

4.11.6

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

4.11.7

Enter search terms and as needed select search category, sub-category and databases that will result in 20 or less records found. You should see results within approximately 10 seconds. When the results are returned, continue to click the Next Page button (depending on your default page size, this button may be disabled) until you reach the "end." Please note that you may not be able to view all the records, but there should be some "end-of-list" indicator (i.e. "we can not fetch any more records").

4.11.8

Once you are at the end of the above results list, continue to click the Previous Page button until you reach the first page.

4.11.9

Enter search terms and as needed select search category, sub-category and databases that will result in one or two records found. You should see results within less than 10 seconds. The Next Page button should be disabled.

4.11.10

Enter search terms and as needed select search category, sub-category and databases that will result in zero records found. You should see (zero) results within less than 10 seconds. The Next Page button should be non-existent or, if it does exist, it should be disabled.

4.12 Verify that you can change your page size

4.12.1

Conduct a search that produces multiple pages of results. Try all different page sizes on the first page of results.

4.12.2

Conduct a search that produces multiple pages (more than 200 records) of results. Once the first page of results is returned, go to the Next Page, and then iterate through the process of changing the page size, moving to the next page, coming back to the previous page, changing the page size and then iterating again.

4.13 Verify that you can add a citation from the search results list

4.13.1

Add citations and verify that: 1) the "Add" button becomes a "Remove" button, 2) the added citation becomes highlighted, and 3) the citation count increases by one.

4.13.2

From a "Search Library Resources" page populated with search results, add a number (say, 5) of Citations in quick succession and click to "Review Citation List". Verify that clicking the "Add" button on a citation disables other buttons on the screen momentarily as the citation is added to the list. Verify that all the citations appear on the "Review Citation List" screen.

4.14 Verify that you can remove a citation from the search results list

4.14.1

Remove citations and verity that: 1) the "Remove" button becomes an "Add" button, 2) the removed citation is no longer highlighted, and 3) the citation count decreases by one.

4.15 Verify that you can properly view inline citations

4.15.1

The following format should be followed (it is in Journal Article form; similar fields apply to other Citation Types):

Title.
Author 1; Author 2; and Author 3. Journal Title, Vol(Iss) Date. Pages.
Custom Link 1 Label | Custom Link 2 Label | view citation | revise | remove

Note that if a citation does not have a certain field (such as Pages, for example) it will not appear in the inline display.

5. Revise Citation List Page

5.1 Verify that you can reach the "Revise Citation List" page

5.1.1

Conduct a search, add a few citations and click on the "Revise Citation List" button. The page should refresh to the "Revise Citation List" page.

5.2 Verify that you can properly view inline citations

5.2.1

The following format should be followed (it is in Journal Article form; similar fields apply to other Citation Types):

Title.
Author 1; Author 2; and Author 3. Journal Title, Vol(Iss) Date. Pages.
Custom Link 1 Label | Custom Link 2 Label | view citation | revise | remove

Note that if a citation does not have a certain field (such as Pages, for example) it will not appear in the inline display.

5.3 Verify that you can Select All/Select None

5.3.1

Click on the "select all" action link. Each citation should have the checkbox checked and highlighted.

5.3.2

Click on the "select none" action link. Each citation should have the checkbox empty and not highlighted.

5.4 Verify that you can access the read-only View of a citation

5.4.1

Click on the "view citation" action link underneath a citation (you should have a number of citations from searching library resources). You should see a read-only view of the citation. Verify that all metadata for the citation is appearing in the read-only view. Do this for all the citations in your Citation List.

5.5 Verify that you can Revise a citation

5.5.1

Click on the "revise" action link underneath a citation (you should have a number of citations from searching library resources). You should see an editable view of the citation. Verify that all the metadata for the citation is appearing in this view. Once finished examining the citation, hit the "Cancel Changes" button and you should return to the Review Citation List page. Do this for all the citations in your Citation List.

5.5.2

Click on the "revise" action link underneath a citation (you should have a number of citations from searching library resources). Change the type of the citation. Various field labels will change according to the Citation Type you choose. Verify that these mappings make sense. Click to "Save Changes" to the edited citation and then view the citation in read-only mode to verify that your changes were saved. Do this for all citations in your Citation List.

5.5.3

Click on the "revise" action link underneath a citation (you should have a number of citations from searching library resources). Change the value of various metadata fields and "Save Changes" to the citation. View the citation in read-only mode to verify that your changes were saved. Do this for all citations in your Citation List.

5.6 Verify that you can Remove a citation

5.6.1

Click on the "remove" action link underneath a citation (you should have a number of citations from searching library resources). The citation should be removed from the Citation List and the order of the citations should be unchanged.

5.6.2

Select one citation to remove and under Citation Actions select "Remove Selected". The citation should not appear in the Citation List anymore and the Citation List order should remain unchanged.

5.6.3

Select multiple citations and under Citation Actions select "Remove Selected". The citations should not appear in the Citation List anymore and the Citation List order should remain unchanged.

5.6.4

Under Citation Actions, select "Remove Entire List". The Citation List should appear empty.

5.7 Verify that you get an SFX Menu when clicking on the citation title

5.7.1

Click on the title of a citaion. This should cause another window to open with an SFX Menu in it. Verify that the metadata SFX is displaying (Journal Title, Volume, Issue, etc.) matches that of the citation you clicked. The SFX Menu may not display all the metadata that we know about, but it should not miss metadata that we do have (i.e. we have a Volume number, but SFX is showing a null Volume number). Do this for all citations in your Citation List.

? 5.8 Verify that you can add a citation from the search results list

?

Add citations and verify that: 1) the "Add" button becomes a "Remove" button, 2) the added citation becomes highlighted, and 3) the citation count increases by oneExport citations

5.8.1

Select one citation to export and under Citation Actions select "Export Selected". You should be prompted to download a file called, 'citations.RIS'. Save this file and open it in a text editor. You should see all the same metadata that you see in the Citation read-only view, but labelled with RIS tags instead of our labels.

  ?

From a "Search Library Resources" page populated with search results, add a number (say, 5) of Citations in quick succession and click to "Review Citation List". Verify that clicking the "Add" button on a citation disables other buttons on the screen momentarily as the citation is added to the list. Verify that all the citations appear on the "Review Citation List" screen5.8.2

Select multiple citations and under Citation Actions select "Export Selected". You should be prompted to download a file called, 'citations.RIS'. Save this file and open it in a text editor. You should see each selected citation's metadata appended one after another. This should be the same metadata that you see in the citations' read-only view, but labelled with RIS tags instead of our labels.

? Verify that you can remove a citation from the search results list

?

Remove citations and verity that: 1) the "Remove" button becomes an "Add" button, 2) the removed citation is no longer highlighted, and 3) the citation count decreases by one5.8.3

Under Citation Actions, select "Export Entire List". You should be prompted to download a file called, 'citations.RIS'. Save this file and open it in a text editor. You should see each selected citation's metadata appended one after another. This should be the same metadata that you see in the citations' read-only view, but labelled with RIS tags instead of our labels.

? Verify that you can properly view inline citations

?

The following format should be followed (it is in Journal Article form; similar fields apply to other Citation Types):

Title. Author 1; Author 2; and Author 3. Journal Title, Vol(Iss) Date. Pages.
Find It! | Custom Link 1 Label | Custom Link 2 Label | revise | remove

5.9 Verify that you can get Back to Search Results

5.9.1

Click on the "Back to Search Results" button. The page should refresh to the "Search Library Resources" page.

5.10 Verify that you can get add more citations to the Citation List

5.10.1

Click on the "Back to Search Results" button. The page should refresh to the "Search Library Resources" page. Add more citations to your Citation List. Click the "Revise Citation List" button and verify that the new citations show up on the "Revise Citation List" page.

5. Revise Citation List Page 5.1 11 Verify that you can reach Cancel the "Review Citation List " page

5.111.1

Verify that you can reach Click on the "Review Cancel Citation List" page by..button. The page should refresh to the Resources page.

? 5.12 Verify that you can access the read-only View of a citation ? reach the "Add Citation List" page.

5.12.1

Click on the "view citation" action link underneath a citation (you should have a number of citations from searching library resources). You should see a read-only view of the citation. Verify that all metadata for the citation is appearing in the read-only view. Do this for all the citations in your Citation List. Finish" button. The page should refresh to the "Add Citation List" page.

???? something about clicking the back or revises button here ???? 6. Citation Details Page

6.1 Verify you can reach the "Citation Details" page.

6.1.1

From the "Revise Citation List" page click on the "view citation" action link. The page should refresh to the "Citation Details" page.

? 6.2 Verify that you can Revise a citation

?

Click return to the "Revise Citation List" page.

6.2.1

From the "Revise Citation List" page click on the "reviseview citation" action link underneath a citation (you should have a number of citations from searching library resources). You should see an editable view of the citation. Verify that all the metadata for the citation is appearing in this view. Once finished examining the citation, hit the "Cancel Changes" button and you should return to the Review Citation List page. Do this for all the citations in your Citation List. . The page should refresh to the "Citation Details" page. Click on the "Back" button. The page should refresh to the "Revise Citation List" page.

?

Click on the "revise" action link underneath a citation (you should have a number of citations from searching library resources). Change the type of the citation. Various field labels will change according to the Citation Type you choose. Verify that these mappings make sense. Click to "Save Changes" to the edited citation and then view the citation in read-only mode to verify that your changes were saved. Do this for all citations in your Citation List.

?

6.2 Verify you can reach the "Revise Citation" page.

6.2.1

From the "Revise Citation List" page click on the "view citation" action link. The page should refresh to the "Citation Details" page. Click on the "Revise Citation" button. The page should refresh to the "Revise Citation" page.

7. Revise Citation Page

7.1 Verify that you can Revise a citation

7.1.1

From the Resources page, under "Actions" for an existing Citation List, select "Revise Citation List". The page should refresh to show the "Revise Citation List" page. Click on the "revise" action link underneath of a citation (you should have a number of citations from searching library resources). Change the value of various metadata fields and "Save Changes" to the citation. View the citation in read-only mode to verify that your changes were saved. Do this for all citations in your Citation List.

. The page should refresh to the "Revise Citation" page. Verify that all the metadata for the citation is appearing in this view. Once finished examining the citation, hit the "Cancel Changes" button and page should refresh to the the "Revise Citation List" page.

? Verify that you can Remove a citation

?

7.1.2

Click on the "removerevise" action link underneath of a citation (you should have a number of citations from searching library resources). The citation should be removed from the Citation List and the order of the citations should be unchanged.

?

Select one citation to remove and under Citation Actions select "Remove Selected". The citation should not appear in the Citation List anymore and the Citation List order should remain unchangedpage should refresh to the "Revise Citation" page. Change the "Citation Type" of the citation. Various field labels will change according to the Citation Type you choose. Verify that these mappings make sense. Click to "Save Changes" button to the edited citation and then view the citation in read-only mode to verify that your changes were saved.

?

Select multiple citations and under Citation Actions select "Remove Selected". The citations should not appear in the Citation List anymore and the Citation List order should remain unchanged.

?

Under Citation Actions, select "Remove Entire List". The Citation List should appear empty7.1.3

Click on the "revise" link of a citation. The page should refresh to the "Revise Citation" page. Change the "Citation Type" of the citation. Change the value of various metadata fields and "Save Changes" to the citation. View the citation in read-only mode to verify that your changes were saved.

? Verify that you get an SFX Menu when clicking on the citation title

?

Click on the title of a citaion. This should cause another window to open with an SFX Menu in it. Verify that the metadata SFX is displaying (Journal Title, Volume, Issue, etc.) matches that of the citation you clicked. The SFX Menu may not display all the metadata that we know about, but it should not miss metadata that we do have (i.e. we have a Volume number, but SFX is showing a null Volume number). Do this for all citations in your Citation List8. Add Citation Page

8.1 Verify that you can reach the "Add Citation" page

8.1.1

From the Resources page, "Add" a new item and select "Add Citation List" from the menu. The page should refresh to show the Add Citations page. On the Add Citations page, click the "Create New Citation" button. The page should refresh and show the "Add Citation" page with "Citation Type" set to "Journal Article" and all the other citation fields are empty.

?

? ??add tasks for page widgets and select all/select none???  

8.2 Verify that you can add a custom citation

8.2.1

From the Add Citation page, click the "Save Citation" button without entering the required Title field. You should get an error preventing you from adding an empty citation to the Citatation List.

8.2.2

From the "Add Citation" page, set the Citation Type to "Journal Article" (it should default to this option). Create a Journal Article citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

? Verify that you can Export citations

?

Select one citation to export and under Citation Actions select "Export Selected". You should be prompted to download a file called, 'citations.RIS'. Save this file and open it in a text editor. You should see all the same metadata that you see in the Citation read-only view, but labelled with RIS tags instead of our labels8.2.3

From the "Add Citation" page, set the Citation Type to "Book" - the field labels should change to ones more suitable for a Book. Create a Book citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

?

Select multiple citations and under Citation Actions select "Export Selected". You should be prompted to download a file called, 'citations.RIS'. Save this file and open it in a text editor. You should see each selected citation's metadata appended one after another. This should be the same metadata that you see in the citations' read-only view, but labelled with RIS tags instead of our labels8.2.4

From the "Add Citation" page, set the Citation Type to "Book Section" - the field labels should change to ones more suitable for a Book Section. Create a Book Section citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

?

Under Citation Actions, select "Export Entire List". You should be prompted to download a file called, 'citations.RIS'. Save this file and open it in a text editor. You should see each selected citation's metadata appended one after another. This should be the same metadata that you see in the citations' read-only view, but labelled with RIS tags instead of our labels8.2.5

From the "Add Citation" page, set the Citation Type to "Report" - the field labels should change to ones more suitable for a Report. Create a Report citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

6. Citation Details Page

6.1 Verify...

6.1.1

8.2.6

From the "Add Citation" page, set the Citation Type to "Unknown" - the field labels should change to ones more suitable for an Unknown item type. Create an Unknown citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

7. Revise Citation Page (action link on review citation list page)

7.1

7.1.1

78.23 Verify that you can cancel a custom citation

78.23.1  

From the Add Citation page, click the "Cancel Citation" button. You should return to the Add Citations page.

8. Add Citation Page

89. Google Scholar

9.1 Verify that you can reach the "Add Citation" page 8the Google Scholar page is properly initialized

9.1.1

From the Resources page, "Add" a new item and select "Add Citation List" from the menu. The page should refresh to show the "Add Citations" page. On the "Add Citations" page, click the "Create New CitationSerach Google Scholar" button. The page should refresh and show the "Add Citation" page with "Citation Type" set to "Journal Article" and all the other citation fields are emptyA pop-up window should open containing a mock-up of a Google Scholar search results page for the keyword "psychology".

89.2 Verify that you can add a custom citation to the list

89.2.1 From

the Add Citation page, click the "Save Citation" button without entering the required Title field. You should get an error preventing you from adding an empty citation to the Citatation List. Click on the "Import into CTools" action link for a citation...

9.2.2

Click on the "Import into CTools" action link for multiple citations...

8.2.2

From the "Add Citation" page, set the Citation Type to "Journal Article" (it should default to this option). Create a Journal Article citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

8.2.3

From the "Add Citation" page, set the Citation Type to "Book" - the field labels should change to ones more suitable for a Book. Create a Book citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels). 9.3 Verify that the count of citations in the list in the main Resources window increments when importing citations from Google Scholar

9.3.1

89.2.4

From the "Add Citation" page, set the Citation Type to "Book Section" - the field labels should change to ones more suitable for a Book Section. Create a Book Section citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels).

8.2.5

From the "Add Citation" page, set the Citation Type to "Report" - the field labels should change to ones more suitable for a Report. Create a Report citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels4 Verify that you get an error reported when trying to import a citation from Google Scholar after you have logged out of Sakai (also, verify that this imported citation does not appear in your citation list once you log back in to Sakai)

9.4.1

10. Concurrency note

10.1 Verify that once an Instructor starts a Citation List, a Student cannot edit that list

10.1.1

With an Instructor user, choose to 'Add a Citation List' in the course worksite's Resources. Once the Instructor sees the 'Add Citations' page, navigate to the Resources of the course worksite with a Student user. The Student should see a Citation List called "New Citation List" that has been created by the Instructor. The Student should not be able to revise this Citation List in any way (neither details, nor Citation List, nor remove).

10.2 Verify that once a Student starts a Citation List, another Student cannot edit that list

10.2.6 From the "Add Citation" page, set the Citation Type to "Unknown" - the field labels should change to ones more suitable for an Unknown item type. Create an Unknown citation with any data you'd like. Click the "Save Citation" button to it to the Citation List. Experiment with adding multi-valued fields such as Author, Rights, Citation, Subject, Note and Links (custom URLs and URL Labels1

With a Student user, choose to 'Add a Citation List' in the course worksite's Resources. Once the Student sees the 'Add Citations' page, navigate to the Resources of the course worksite with a different Student user, Student2. Student2 should see a Citation List called "New Citation List" that has been created by the Student. Student2 should not be able to revise this Citation List in any way (neither details, nor Citation List, nor remove).

810.3 Verify that you can cancel a custom citation 8two or more users can create Citation Lists "at the same time"

10.3.1

From the Add Citation page, click the "Cancel Citation" button. You should return to the Add Citations page With two or more Instructor users, choose to 'Add a Citation List' in the course worksite's Resources at the same time. All users should be taken to the 'Add Citations' page. One user should see the title of the Citation List as "New Citation List" and the other should see a title of "New Citation List-1".

9. Google Scholar

9.1 Verify that the Google Scholar page is properly initialized

9.1.1

From the Resources page, "Add" a new item and select "New Citation List" from the menu. The page should refresh to show the Add Citations page. On the Add Citations page, click the "Serach Google Scholar" button. A pop-up window should open and ???????????????? 10.3.2

With two or more Student users, choose to 'Add a Citation List' in the course worksite's Resources at the same time. All users should be taken to the 'Add Citations' page. One user should see the title of the Citation List as "New Citation List" and the other should see a title of "New Citation List-1".

? Verify that you can save an empty Citation List

?

Conduct a simple search. Do not add any citations. Instead click the "Revise Citaiton List" button. The page should refresh to show the "Revise Citation List" page. Click the "Finish" button. Attempt to save the list without entering the required Title field. You should get an error. 10.3.3

With at least one Student user and at least one Instructor user, choose to 'Add a Citation List' in the course worksite's Resources at the same time. All users should be taken to the 'Add Citations' page. One user should see the title of the Citation List as "New Citation List" and the other should see a title of "New Citation List-1".

?